BOD Incubator "Super Deluxe” with Solid State Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc. Construction :– Robust Construction. Outer cabinet is made of M.S. Sheet, duly pre treated & finished with epoxy powder coated paint for lasting finish. Inner chamber is made of high polished stainless steel/aluminium (anodized). It has provision for allowing wide range of shelf positions & spacings. SS/Aluminium trays are also provided. Chamber is duly insulated to minimise heat loss. Two door are provided. Outer door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss. Door is provided with lock and key. Inner door is made of transparent acrylic glass for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss. Temperature Control :– The heart of the Interlabs B.O.D. Incubator is the excellent and reliable solid state temperature controller cum indicator digital display, range from 5°C to 50°C ± 0.5°C. Hermetically sealed, high performance compressor works efficiently to lower the inside chamber temperature. Heating elements are placed in the path of moving air duly insulated from the body. Cooling coils also lie in the air circulation path. Air is circulated by a double shaft self-cooled, blower to keep the temp. uniform throughout the inner chamber. A safety thermostat is provided, which switches off the heaters in the event of failure of the normal temp. control system to protect the specimens from excessive heat. Also fitted with a door operated lamp for illumination inside the chamber. Caster wheel provided at bottom for easy mobility. Control Panel :– All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting fine and coarse knobs allow the user to set any desired temp. A Voltmeter is provided on the panel to read the incoming voltage. Salient Feature :– Interlabs BOD INCUBATOR switches from heating to cooling and vice versa irrespective of the ambient temperature because of its unique design and thus is capable of working without any user intervention. Supplied complete with 3 shelves of anodized Aluminium or Stainless Steel as per the chamber, cord and plug, to work on 220 Volts, 1 Phase, 50 Hz, AC supply. Optional Accessories (YSI–440) :– • Interior illumination with 3 Nos. fluorescent tubes. • Automatic cyclic timer 0–24 hrs. regulating illumination cycle. • Arrangement for incubation carbon dioxide & air mixture. • Carbon–di–oxide Cylinder 9 liters. • Air compressor. • Voltage Stabilizer 3 KVA. Available in following chamber sizes :– W × H × D Cap. Cu. ft. 455 × 605 × 415 mm 4.0 500 × 800 × 415 mm 6.1 565 × 865 × 550 mm 10.0 650 × 900 × 550 mm 12.0 700 × 900 × 650 mm 15.0     Humidity System (Steam) for BOD Incubator BOD Incubator can be provided with humidity arrangement. Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported Humidistat from ambient to 95% ± 3% RH.     Humidity System (Water Spray) for BOD Incubator Humidity is created by spraying water in the form of fine mist generated with the help of air compressor and other accessories which are supplied with the unit. Humidity is controlled by imported Humidistat from ambient to 95% ± 3% RH.        Laboratory Biological Incubator ‘Super Deluxe’ for Environmental studies (Environmental Chamber/ Growth Chamber) Phytotron These are well designed for conducting different Laboratory & Research experiments to study growth of plants and animals under controlled environmental conditions and also in the fields of enzymatic digestion processes, incubation etc. Construction :– Robust construction. Interior made of polished S.S. sheet, intermediate walls of G.I. Sheet and Outer cabinet is made of M.S. Sheet duly pretreated & finished with epoxy powder paint. Glass wool insulation is provided to prevent thermal losses. Double walled door with a gasket seals the inner chamber from outside air. Viewing glass window allows inspection of samples without opening the door or disturbing the temperature. 4 S.S. adjustable shelves are provided. Air ventilation and arrangement to introduce fresh air supply. Cooling/Heating System :– Cooling is achieved by refrigeration system using a hermetically sealed air cooled compressor and other parts of high quality. This system is fixed at the lower part of the incubator. Cooling coil is fixed in the rear/side portion of the chamber in the path of moving air. Heating is provided with heaters duly insulated from the body & are fixed near the cooling coil. The blower circulate the air into chamber through heaters/cooling coils to ensure uniformity of temperature inside the chamber. Temperature. Control :– Temperature is controlled by solid state electronic temperature controller cum indicator digital display using Pt 100 RTD sensor device. Temp. range 1°C to 50°C ±1°C. Humidification :– It is controlled by humidistat and is achieved by spraying water vapor inside the chamber with the help of pump/air compressor. This system create the require humidity from ambient to 95% ±3% RH. Arrangement exists only for increasing the humidity & not for decreasing the humidity. Illumination :– High intensity illumination of approx 12000 LUX is provided inside the chamber by fluorescent tubes, cyclically creating day/night conditions automatically controlled through 24 hrs. timer. Control Panel :– All control, expect humidistat, are fitted in the front panel for humidity, illumination, timer, etc. & are easily accessible. Power Supply :– Suitable to work on 230 Volts, 50 Hz, Single Phase, AC supply. Available in following chamber sizes :– W × H × D No. of Shelves 665 × 856 × 550 mm 3 765 × 1365 × 670 mm 4 Optional Accessories :– • Voltage Stabilizer 5 KVA • Two set point digital temp. controller cum indicator.     Plant Growth Chamber State-of-the-art equipment for Plant growth and animal studies. Provision for light, temperature and humidity are made to test plant growth and analyse their flowering cycle. Inner chamber made of S.S. 304 and outer of thick cold rolled steel duly pretreated & powder coated. 75 mm thick glass wool of high density is sandwiched between the two walls to provide insulation. A see through window is provided for inspection of plants. Heating is controlled by solid state digital temp controller cum indicator to maintain temp. between 15°C to 50°C. A 7 days programmable timer is provided. Cooling is maintained by hermetically sealed compressor. Provision for 50,000 lux is provided with a mixture of incandescent lamp & fluorescent light to give effect of day light, whereas humidity is controlled from 55% to 95% ± 5% by humidistat. Chamber Volume :– 10, 20, 30, 45, 50 Cuft.     Walk-In-Incubator Temp. range 5°C above ambient to 60°C ± 1°C. Designed for vast number of incubation applications, can be installed even in hallway room or wherever convenient. Design features includes enamelled steel exterior, aluminium or S.S. interior, ventilators, internal lighting, exhaust fan etc. Suitably insulated, 300 mm sq. inspection window at the door permits inside view without opening the door. Complete with panel, housing all controls, circulating fan. Temperature indicator cum Controller etc. Supplied factory assembled, complete with cord and plug, to work on 220 Volts, 1 Ph, 50 Hz AC supply. Available in following chamber size :–  W  ×  H   ×  D 1.1 × 2.3 × 1.1 mts

[ Email : info@ambalalab.com ]

Interlabs range of scientific educational surgical medical hospital engineering laboratory instruments apparatus and equipment, indian exporters, indian exporters directory, indian manufacturers directory, indian service providers, B2B Portal India, indian market, online guide, importers, buyers, electronic trade, indian business, exporters in india, manufacturers in india, business to business website india, e-commerce in india, electronic trade and commerce, tradeguide, business,import, export, e-commerce, product, business club, india business club, b2b portal, online trading, events, india business, ambala, haryana, ambala cantt, quality, laboratory equipments, educational equipments, equipments, manufacturers of equipments, manufacturers of laboratory equipments, manufacturers of educational equipments, exporters of laboratory equipments, exporters of educational equipments, manufacturers and exporters of laboratory equipments, manufacturers and exporters of educational equipments, manufacturers and exporters of engineering equipments, manufacturers of engineering equipments, exporters of engineering equipments, journal bearing apparatus, bearings, journal bearings, bearing apparatus, axial flow compressor test rig, test rigs, axial flow compressors, ice plant trainers, universal vibration apparatus, universal vibration , variable compression petrol engine test rig, steam jet refrigeration trainer, heat transfer laboratory, conduction section, test rigs, composite wall apparatus, lagged pipe apparatus, hydraulic analogy of heat conduction, heat transfer apparatus, pin fin apparatus, natural convection apparatus, forced convection apparatus, specific heat of air apparatus, heat transfer in agitated vessel, radiation apparatus, emmisivity measurement apparatus, stefan bolzmann apparatus, boiling apparatus,
condensation apparatus, boiling and condensation apparatus, critical heat flux apparatus, heat exchanger apparatus, concentric tube heat exchangers, feat exchangers, plain tube type heat exchangers, tube type heat exchangers, finned tube type heat exchangers, plain tube omparator type heat exchangers, finned tube comparator type heat exchangers, cross flow heat exchanger apparatus, flow heat exchanger, shell and tube heat exchanger, shell heat exchangers, tube heat exchangers, water to water type shell heat exchanger, water to water type tube heat exchanger, water to air type shell heat exchanger, water to air type tube heat exchangers, plate type heat exchanger apparatus, regenerative heat exchanger apparatus, thermal conductivity apparatus, thermal conductivity equipments, thermal conductivity of metal rod, metal rod, thermal conductivity of insulating powder, thermal conductivity, thermal conductivity of liquid, thermal conductivity by guarded hot plate, thermal conductivity of gases, refrigeration lab equipments,
equipments for refrigeration, equipments for airconditioning lab, airconditioning lab equipments, refrigeration and airconditioning labs, refrigerator cycle demonstrators, general cycle refrigeration trainers, refrigeration and air conditioning experimentation benches, industrial refrigeration trainers, air conditioning trainers, general cycle type equipments, simulation type refrigeration lab equipments, recirculating type lab equipments, window air conditioning trainers, industrial air conditioning trainers, centralised air conditioning trainers, ice plant trainers, vortex tube trainers, vortex tube demonstrators, water cooler trainers, domestic refrigeration trainers, vapor absorption refrigeration trainers, air expansion refrigeration trainers, cascade refrigeration trainers, desert cooler trainer, water cooling tower apparatus, refrigeration control display boards, steam jet refrigeration test rigs, heat pump trainers, air and water heat pump trainers, air heat pump trainers, mechanical heat pump trainers, gas charging units, cold storage trainers, convection apparatus, conduction apparatus, condensing pressure measurement equipments, evaporating pressure measurement equipments, input to compressor heater measurement equipments, general cycle refrigeration trainers, general cycle
refrigeration tutors, refrigeration trainers, refrigeration tutors, refrigeration and air-conditioning experimentation benches, refrigeration experimentation benches, air-conditioning experimentation benches, experimentation benches, industrial refrigeration trainer air
conditioning trainers, simulation type air conditioning trainer, air conditioning trainer simulation type, airconditioning trainer recirculation type, recirculation type airconditioning trainers, industrial air conditioning trainers, centralised air conditioning trainer, ice plant trainer, vortex tube trainers, vortex tube demonstrator, water cooler trainer, domestic refrigerator trainer, vapor absorption refrigeration trainer, air expansion refrigeration trainer, cascade refrigeration trainer, desert cooler apparatus, water cooling tower apparatus, steam jet refrigeration test rigs, steam jet refrigeration, test rigs, heat pump trainer, air and water heat pump trainers, hydraulics laboratory equipments, i.r. type hydraulic equipments, conventional type hydraulic equipments, h.l.t. type hydraulic equipments, reynoulds apparatus, verification of bernoullis theorem apparatus, flow over notches apparatus, flow over weir apparatus, flow through orifice and mouthpiece apparatus, flow measurement by venturimeter and orificemeter, losses in pipe fittings, losses in pipe friction, flow through submerged orifices, flow through helical coil, impact of jet apparatus, study of pressure measurement devices, study of free and forced vortex, flow isualisation apparatus, metacentric height of ship model, tilting flume apparatus, heleshaw apparatus, water hammer apparatus, study of flow measurement.devices, hydraulic machinery, hydraulic machinery equipments, centrifugal pump test rig, closed circuit type centrifugal pump test rig, constant speed type centrifugal pump test rig, ac motor and pulley type centrifugal pump test rig, dc motor variable speed type centrifugal pump test rig, multistage centrifugal, pump test rig, centrifugal pump test rigs, centrifugal pumps in series test rigs, centrifugal pumps in parallel test rig, closed circuit type centrifugal pump test rigs, reciprocating pump test rigs, closed circuit type reciprocating pump test rigs, ac motor type reciprocating pump test rigs, cone pulley type reciprocating pump test rigs, dc motor and dimmer control type reciprocating pump test rigs, dc motor and thyristorised control type reciprocating pump test rigs, dc motor and thyristorised control type reciprocating pump test rigs, gear pump test rig, closed circuit type gear pump test rigs, pelton wheel turbine test rig, closed circuit type pelton wheel turbine test rigs, pelton wheel turbine test rig recirculating pump, francis turbine test rig, closed circuit type francis turbine test rigs, theory of machines and tribology lab, theory of machines and tribology lab, universal vibration apparatus, cam analysis apparatus, whirling of shaft demonstrator, static and dynamic balancing apparatus, motorised gyroscope apparatus, journal bearing apparatus, governor apparatus, coriolli component of acceleration apparatus, michell titling pad bearing apparatus, pin and disc wear test apparatus, pin wear test apparatus disc wear test apparatus, modal analysis of beam influence
of inertia, epicyclic gear train, holding torque apparatus, ball bearing test rigs, lathe tool dynamometers, lathe tool dynamometers, drill tool dynamometers, milling tool dynamometer, grinding tool dynamometer, polygon law of forces apparatus, simple jib crane apparatus, simple wheel and axle apparatus, differential wheel and axle apparatus, single purchase crab apparatus, double purchase crab apparatus, screw jack apparatus, worm and worm wheel apparatus, worm wheel apparatus, rope and pulley block apparatus, rope block apparatus, pulley block apparatus, applied mechanics laboratory equipments, polygon law of forces apparatus, simple jib crane apparatus, simple wheel and axle apparatus, differential wheel and axle apparatus, single purchase crab apparatus, double purchase crab apparatus, screw jack apparatus, worm and worm wheel apparatus, rope and pulley block apparatus, electrical machine laboratory equipments, d. c. machine test  apparatus, transformer test apparatus, induction motor test apparatus, structural laboratory equipments, elastic and continuous beam apparatus, shear center apparatus, bending moment and shear force apparatus, deflection of curved beam apparatus, suspension bridge apparatus, two and three hinged arches apparatus, column buckling apparatus, deflection of pin joined truss apparatus, elastic beam apparatus, continuous beam apparatus, bending moment apparatus, shear  force apparatus, hinged arches apparatus, stress analysis laboratory equipments, diffused light research polariscope, reflection polariscope, oblique incidence attachment, stress freezing oven,  fringe sharpener, model cutter, model polisher, dust collector, aerodynamics turbomachinery laboratory equipments, thyristor control, cascade test tunnel, lathe tool dynamometer, drill tool dynamometer, milling tool dynamometer, demonstration board models, kinematic pairs, inversion of four bar chain, inversion of slider crank chain, inversion of double slider crank chain, generation of involute gear teeth, kinematics of involute gear teeth, interference and undercutting single shoe brake, double shoe brakes, band and block brake, band brake, block  brake, disc brakes, internal expanding brake clutch, single plate clutch, multi plate clutch, centrifugal clutch, cone clutch gas turbine, single stage gas turbine, two stage gas turbine, steam turbine, steam engine, wankel engine cam and follower, wankel engine cam, wankel engine follower, flat cam with translating follower, flat cam, radial cam with translating follower, radial cam, radial cam with oscillating follower, cylindrical end cam with translating follower,
cylindrical end cam, cylindrical cam with oscillating follower, end cams, end cams with oscillating follower, cylindrical cam with oscillating follower, quick return mechanisms, crank and slotted level quick return mechanism, crank level quick return mechanisms, whitworth quick return mechanism, draglink quick return mechanism, types of shaft coupling, types of drives, types of threads, straight line mechanism boards, hart straight line mechanism, peaucelliers mechanism, scott - russel mechanisms, watts approximate s.l. mechanisms, generation of cycloid and trochoid, generation of cycloids, generation of trochoids, trochoid generation, cycloid generation, generation of spirals, types of centrifugal impellers, types of screw fastenings, industrial equipments, water spray test rig, subsonic wind tunnel, diesel / petrol engine test system, hermetically sealed compressor test rig, dead weight pressure gauge tester, universal motor test bed, thermal conductivity of liquids, thermal conductivity of insulating slabs, thermal conductivity of insulating powder, thermal conductivity of gases, pin and disc wear test rig, pin wear test rigs, disc wear test rigs, hydraulic dynamometers, lubricating oil pump test rigs, industrial equipments, water spray test rig, subsonic wind tunnel, diesel / petrol engine test system, hermetically sealed compressor test rig, dead weight pressure gauge tester, universal motor test bed, thermal conductivity of liquids, thermal conductivity of insulating slabs, thermal conductivity of insulating powder, thermal conductivity of gases, pin wear test rigs, disc wear test rigs, pin and disc wear test rigs, hydraulic dynamometer, lubricating oil pump test rig and test rigs, lubricating oil pump test rigs, heat transfer laboratory equipments, conduction section equipments, composite walls apparatus, heat pipe demonstrator, hydraulic analogy of heat conduction, critical radius of insulating material, equipment for critical radius  of insulating material test, testing equipment for critical radius of insulating material, journal bearing apparatus with pressure gauge, ice plant trainer, asia, asian, india, indian, mumbai, maharashtra, industrial, industries, thane, pune, nashik, aurangabad, ratnagiri, nagpur, ahmednagar, akola, amravati, chandrapur, dhule, jalgaon, raigad, sangli, satara, belgaum, kolhapur, belgaon, yellow pages, directory, directories, products, chemical, mechanical engineering, electronics, electrical, packaging, plastic, machinery, metallurgical