Hot Air sterilizer (Oven)-Memmert Type

Due to progressive policy of continuously developing high quality products,  was the first in India to get the prestigious ISI mark for their Hot Air Sterilizers. All the instruments are subjected to tough quality control before despatch. These are designed principally to destroy Bacteria, Viruses, Fungus and Sterilize Surgical & Dental Instruments. Glasswares etc. by application of dry heat at temp. ranging between 140°C to 200°C as per IS 3119.

Construction :– Interlabs Ovens are sturdy, with double walled construction. Inner chamber is made of Anodized Aluminium or Highly Polished Stainless Steel. Outer chamber is made of Mild Steel Sheet duly pretreated in seven tanks process for surface treatment & are finished with durable Powder Coated Paint. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber is fabricated with ribs to adjust shelves to any convenient height. Supplied with 2 or 3 removable shelves. Shelves are made of polished SS Sheet or Anodized Aluminium. Insulated door is fitted with heavy hinges with a ball catcher spring - loaded door closing device.

Heating Element :– Heating elements are made of high grade imported nichrome wire which are insulated inside the porcelain beads and are generally placed at the bottom and both side ribs for uniform temperature all over the space.

Temperature Control :– Temperature is controlled by Imported capillary type Thermostat. Temperature control knob of each oven is graduated in centigrade degrees after actually observing the temperature is steady state. Supplied with L-shaped prismatic glass THERMOMETER fitted on top of the Oven for reading the chamber temperature. Wide temperature 50°C to 250°C ovens for various applications.

Ventilation :– Air ventilator ports provided on both sides at top to ventilate, gases and fumes if any.
Control Panel :– The equipment is provided with a panel having a thermostat control knob. ON/OFF switch, two pilot indication lights and provision for fixing the TIMER.

Power Requirement :– Supplied with cord and plug. Suitable to operate on 220 V single phase, 50 Hz, AC supply.

Size of inner chamber :–
    W   ×  H   ×  D           No. of Shelves
   300 × 250 × 300 mm    2
   355 × 355 × 355 mm    2
   455 × 455 × 455 mm    2
   455 × 605 × 455 mm    3
* 605 × 605 × 605 mm    3
* 605 × 910 × 455 mm    3
* 605 × 910 × 605 mm    3
* These sizes are provided with air circulating fan as standard feature.

Optional Accessories :–
• Air Circulating Fan.
• Digital Display Temp. Indicator in lieu of L-Shaped Thermometer.
• Digital Display Temp. Controller-Cum-Indicator in lieu of thermostat & L-shaped thermometer.
• Micro processor based PID temp. controller-cum-indicator in lieu of thermostat & L-shaped thermometer.
• Timer

Spare Accessories :–
• L–shaped thermometer
 

 
Universal Oven-Memmert Type

Suitable for applications involving high temperature upto 300°C and corrosive chemicals in Laboratories, Research Institutions and Industries.

Construction :–
Interlabs Ovens are sturdy, with double walled construction. Inner chamber is made of M.S. Sheets or Highly Polished Stainless Steel. Outer chamber is made of Mild Steel Sheet, duly pretreated in seven tanks process for surface treatment & finished with durable Powder Coated Paint. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber is fabricated with ribs to adjust shelves to any convenient height. Supplied with 2 or 3 removable shelves.
SHELVES are made of perforated polished SS Sheet/M.S. Mesh. Door is double walled & is insulated and is fitted with heavy hinges with a ball catcher spring - loaded door closing device.

Heating Element :–
Heating elements are made of high grade imported nichrome wire which are insulated inside the porcelain beads and are generally placed at the bottom and both sides ribs for uniform temperature all over the space.

Temperature Range :–
A Wide temperature range of 50°C to 300°C ± 2°C to 3°C for various applications. The temp. inside the chamber maintained constant by natural convection currents of heated air.

Temperature Control :–
Temperature is controlled by IMPORTED capillary type THERMOSTAT. Temperature control knob of each oven is graduated in centigrade degrees after actually observing the temperature is steady state. Supplied with L-shaped prismatic glass THERMOMETER fitted on top of the Oven for reading the chamber temperature.

Ventilation :–
Air ventilator ports provided on both sides at top to ventilate, gases and fumes if any & to accelerate convection process.

Control Panel :–
The equipment is provided with a panel on which are mounted a thermostat control knob, ON/OFF switch high/low switch pilot indication lights.
The units are tested for continuous performance and safety in our most modern laboratory equipped with various test instruments. The unit can be fitted with an optional air circulating fan.

Power Requirement :–
Suitable to operate on 220 V single phase, 50 Hz, AC supply.

Size of inner chamber :–
W × H × D No. of Shelves
300 × 300 × 300mm 2
355 × 355 × 355mm 2
455 × 455 × 455mm 2
455 × 605 × 455mm 3
605 × 605 × 605mm 3
605 × 910 × 455mm 3
605 × 910 × 605mm 3
 
 
Chromatography Oven

Temp. range 50°C to 150°C ± 1oC Controlled by “IMPORTED” Thermostat. Description similar to YSI–430. Chamber Size 625W × 605H × 605D mm in Alum. or S.S. Sheet.
Special Offer (Optional)
• Digital Display temp. indicator.
• Digital Display temp. controller–cum–indicator in lieu of thermostat.
 

 
Deluxe Oven - High Temp

Interlabs Deluxe model Ovens are sturdy, with double walled construction. Inner chamber is made of M.S./S.S. Outer chamber is made of M.S. duly pretreated in seven tanks process for surface treatment & finished with durable Powder Coated Paint. M.S. Sheet inner chamber is painted with high temperature aluminium paint. 100 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber has support to adjust shelves to any convenient height. Supplied with 2 removable shelves. SHELVES are made of perforated polished SS Sheet/M.S. Mesh as per chamber.
Door is double walled & is insulated and is fitted with heavy hinges with a ball catcher door closing device. Inner chamber can optionally be provided of S.S. Sheet.
Temperature Control :– Temperature is controlled by digital temp. controller can indicator. Heaters are placed at the bottom and two sides in different sets and a power selection switch which permits selection of High, Medium and Low Wattage, assures quick stabilizing of working temperature inside the chamber. Temperature range various from 50°C to 350°C ± 3°C. The oven is complete with two indicators, rotary switch for low, medium and high pressure wattage with off position.
Power Requirement :– Suitable to operate on 220 V single phase, 50 Hz, AC supply.

Size of inner chamber :–
W × H × D Load
455 × 455 × 455 mm 3.5 kw
605 × 605 × 605 mm 5.0 kw
605 × 910 × 605 mm 5.0 kw

Optional Accessories :–
• Air circulating fan.
• Timer.
• Micro processor based PID temp. controller-cum-indicator.
 

 
Glass Bead Sterilizer

Complete body made of powder coated steel with inner chamber made of thick st. steel, thermostatically controlled for temp from 50°C to 300°C. Supplied complete with glass beads suitable for instant sterilization of needles, forceps, beads etc. Available small & medium size.
 
 

 
Industrial Drying Oven-High Temps

Suitable for heat treatment, baking and drying applications in Industries or Institutes engaged in the production of Vaccines. Tablets, Bottle Sterilizing, Baking Breads or Biscuits, Drying Chemicals, PCB Processing, Armature Windings, Soaking electronic components like Yoke, Coils, EHT Coils, Transformers etc.

Construction :– The construction is double walled on sturdy angle iron frame with both inner and outer walls of thick PCRC sheet which is duly pretreated for surface treatment & finished with powder coated paint. The inner wall is painted with high temp. aluminium paint to withstand long duration heating cycles normally required in industrial applications, and the outer wall is finished with powder coated paint. The 75 mm gap between the two walls is filled with high grade glass wool insulation to prevent loss of heat and thereby saving energy. Air is circulated by a heavy duty blower to maintain inside temperature uniformity with a minimum temperature gradient throughout the working chamber. Brackets to support the heavily laden perforated trays at different height are provided on the sides of the inner chamber. The front door with sturdy hinges are also double-walled with gap between the two walls filled-in with high grade glass wool insulation. The door also have system to prevent opening.

Heating :– Heating is done by Tubular air heaters placed in the moving air path. These are interlocked with blower. Ventilation with adjustable opening on the top facilities fleeing of any fumes or vapors produced during the process.

Temp. Control :– The temperature is controlled by fine capillary hydraulic type imported thermostat with an accuracy of 5°C over a range of 50°C to 250°C ± 5°C. Temperature is indicated by Dial Thermometer. The equipment is tested for continuous performance & safe operation in out most modern testing laboratory. It is securely packed to avoid any transit damage during despatch.

Control Panel :– The Control panel include a Main switch to ON/OFF the unit, mains indicator, a dial type thermometer, Temperature control knob of thermostat is calibrated in the factory after actually observing the temperature in steady state.

Power Supply :– The unit is supplied complete in all respect. It is suitable to work on 220V, 50 Hz single phase or 440 V, three phase Ac depending upon the size.

Optional Accessories :–
• Timer
• Digital Indictor in lieu of dial thermometer.
• Temperature Indicator cum Controller Digital in lieu of thermostat & dial thermometer.

Size of inner chamber :–
W × H × D Tray Cap. Load
90 × 90 × 60 cms (3´ × 3´ × 2´) 12 5 KW
90 × 90 × 90 cms (3´ × 3´ × 3´) 18 6 KW
90 × 120 × 90 cms (3´ × 4´ × 3´) 24 7 KW
90 × 150 × 90 cms (3´ × 5´ × 3´) 24 10 KW
90 × 180 × 60 cms (3´ × 6´ × 2´) 36 10 KW
90 × 180 × 90 cms (3´ × 6´ × 3´) 48 15 KW
90 × 240 × 90 cms (3´ × 8´ × 3´) 60 15 KW
120 × 240 × 90 cms (4´ × 8´ × 3´) 96 18 KW
120 × 180 × 120 cms (4´ × 6´× 4´) 48 18 KW
 

 

[ Email : info@ambalalab.com ]

 

Interlabs range of scientific educational surgical medical hospital engineering laboratory instruments apparatus and equipment, indian exporters, indian exporters directory, indian manufacturers directory, indian service providers, B2B Portal India, indian market, online guide, importers, buyers, electronic trade, indian business, exporters in india, manufacturers in india, business to business website india, e-commerce in india, electronic trade and commerce, tradeguide, business,import, export, e-commerce, product, business club, india business club, b2b portal, online trading, events, india business, ambala, haryana, ambala cantt, quality, laboratory equipments, educational equipments, equipments, manufacturers of equipments, manufacturers of laboratory equipments, manufacturers of educational equipments, exporters of laboratory equipments, exporters of educational equipments, manufacturers and exporters of laboratory equipments, manufacturers and exporters of educational equipments, manufacturers and exporters of engineering equipments, manufacturers of engineering equipments, exporters of engineering equipments, journal bearing apparatus, bearings, journal bearings, bearing apparatus, axial flow compressor test rig, test rigs, axial flow compressors, ice plant trainers, universal vibration apparatus, universal vibration , variable compression petrol engine test rig, steam jet refrigeration trainer, heat transfer laboratory, conduction section, test rigs, composite wall apparatus, lagged pipe apparatus, hydraulic analogy of heat conduction, heat transfer apparatus, pin fin apparatus, natural convection apparatus, forced convection apparatus, specific heat of air apparatus, heat transfer in agitated vessel, radiation apparatus, emmisivity measurement apparatus, stefan bolzmann apparatus, boiling apparatus,
condensation apparatus, boiling and condensation apparatus, critical heat flux apparatus, heat exchanger apparatus, concentric tube heat exchangers, feat exchangers, plain tube type heat exchangers, tube type heat exchangers, finned tube type heat exchangers, plain tube omparator type heat exchangers, finned tube comparator type heat exchangers, cross flow heat exchanger apparatus, flow heat exchanger, shell and tube heat exchanger, shell heat exchangers, tube heat exchangers, water to water type shell heat exchanger, water to water type tube heat exchanger, water to air type shell heat exchanger, water to air type tube heat exchangers, plate type heat exchanger apparatus, regenerative heat exchanger apparatus, thermal conductivity apparatus, thermal conductivity equipments, thermal conductivity of metal rod, metal rod, thermal conductivity of insulating powder, thermal conductivity, thermal conductivity of liquid, thermal conductivity by guarded hot plate, thermal conductivity of gases, refrigeration lab equipments,
equipments for refrigeration, equipments for airconditioning lab, airconditioning lab equipments, refrigeration and airconditioning labs, refrigerator cycle demonstrators, general cycle refrigeration trainers, refrigeration and air conditioning experimentation benches, industrial refrigeration trainers, air conditioning trainers, general cycle type equipments, simulation type refrigeration lab equipments, recirculating type lab equipments, window air conditioning trainers, industrial air conditioning trainers, centralised air conditioning trainers, ice plant trainers, vortex tube trainers, vortex tube demonstrators, water cooler trainers, domestic refrigeration trainers, vapor absorption refrigeration trainers, air expansion refrigeration trainers, cascade refrigeration trainers, desert cooler trainer, water cooling tower apparatus, refrigeration control display boards, steam jet refrigeration test rigs, heat pump trainers, air and water heat pump trainers, air heat pump trainers, mechanical heat pump trainers, gas charging units, cold storage trainers, convection apparatus, conduction apparatus, condensing pressure measurement equipments, evaporating pressure measurement equipments, input to compressor heater measurement equipments, general cycle refrigeration trainers, general cycle
refrigeration tutors, refrigeration trainers, refrigeration tutors, refrigeration and air-conditioning experimentation benches, refrigeration experimentation benches, air-conditioning experimentation benches, experimentation benches, industrial refrigeration trainer air
conditioning trainers, simulation type air conditioning trainer, air conditioning trainer simulation type, airconditioning trainer recirculation type, recirculation type airconditioning trainers, industrial air conditioning trainers, centralised air conditioning trainer, ice plant trainer, vortex tube trainers, vortex tube demonstrator, water cooler trainer, domestic refrigerator trainer, vapor absorption refrigeration trainer, air expansion refrigeration trainer, cascade refrigeration trainer, desert cooler apparatus, water cooling tower apparatus, steam jet refrigeration test rigs, steam jet refrigeration, test rigs, heat pump trainer, air and water heat pump trainers, hydraulics laboratory equipments, i.r. type hydraulic equipments, conventional type hydraulic equipments, h.l.t. type hydraulic equipments, reynoulds apparatus, verification of bernoullis theorem apparatus, flow over notches apparatus, flow over weir apparatus, flow through orifice and mouthpiece apparatus, flow measurement by venturimeter and orificemeter, losses in pipe fittings, losses in pipe friction, flow through submerged orifices, flow through helical coil, impact of jet apparatus, study of pressure measurement devices, study of free and forced vortex, flow isualisation apparatus, metacentric height of ship model, tilting flume apparatus, heleshaw apparatus, water hammer apparatus, study of flow measurement.devices, hydraulic machinery, hydraulic machinery equipments, centrifugal pump test rig, closed circuit type centrifugal pump test rig, constant speed type centrifugal pump test rig, ac motor and pulley type centrifugal pump test rig, dc motor variable speed type centrifugal pump test rig, multistage centrifugal, pump test rig, centrifugal pump test rigs, centrifugal pumps in series test rigs, centrifugal pumps in parallel test rig, closed circuit type centrifugal pump test rigs, reciprocating pump test rigs, closed circuit type reciprocating pump test rigs, ac motor type reciprocating pump test rigs, cone pulley type reciprocating pump test rigs, dc motor and dimmer control type reciprocating pump test rigs, dc motor and thyristorised control type reciprocating pump test rigs, dc motor and thyristorised control type reciprocating pump test rigs, gear pump test rig, closed circuit type gear pump test rigs, pelton wheel turbine test rig, closed circuit type pelton wheel turbine test rigs, pelton wheel turbine test rig recirculating pump, francis turbine test rig, closed circuit type francis turbine test rigs, theory of machines and tribology lab, theory of machines and tribology lab, universal vibration apparatus, cam analysis apparatus, whirling of shaft demonstrator, static and dynamic balancing apparatus, motorised gyroscope apparatus, journal bearing apparatus, governor apparatus, coriolli component of acceleration apparatus, michell titling pad bearing apparatus, pin and disc wear test apparatus, pin wear test apparatus disc wear test apparatus, modal analysis of beam influence
of inertia, epicyclic gear train, holding torque apparatus, ball bearing test rigs, lathe tool dynamometers, lathe tool dynamometers, drill tool dynamometers, milling tool dynamometer, grinding tool dynamometer, polygon law of forces apparatus, simple jib crane apparatus, simple wheel and axle apparatus, differential wheel and axle apparatus, single purchase crab apparatus, double purchase crab apparatus, screw jack apparatus, worm and worm wheel apparatus, worm wheel apparatus, rope and pulley block apparatus, rope block apparatus, pulley block apparatus, applied mechanics laboratory equipments, polygon law of forces apparatus, simple jib crane apparatus, simple wheel and axle apparatus, differential wheel and axle apparatus, single purchase crab apparatus, double purchase crab apparatus, screw jack apparatus, worm and worm wheel apparatus, rope and pulley block apparatus, electrical machine laboratory equipments, d. c. machine test  apparatus, transformer test apparatus, induction motor test apparatus, structural laboratory equipments, elastic and continuous beam apparatus, shear center apparatus, bending moment and shear force apparatus, deflection of curved beam apparatus, suspension bridge apparatus, two and three hinged arches apparatus, column buckling apparatus, deflection of pin joined truss apparatus, elastic beam apparatus, continuous beam apparatus, bending moment apparatus, shear  force apparatus, hinged arches apparatus, stress analysis laboratory equipments, diffused light research polariscope, reflection polariscope, oblique incidence attachment, stress freezing oven,  fringe sharpener, model cutter, model polisher, dust collector, aerodynamics turbomachinery laboratory equipments, thyristor control, cascade test tunnel, lathe tool dynamometer, drill tool dynamometer, milling tool dynamometer, demonstration board models, kinematic pairs, inversion of four bar chain, inversion of slider crank chain, inversion of double slider crank chain, generation of involute gear teeth, kinematics of involute gear teeth, interference and undercutting single shoe brake, double shoe brakes, band and block brake, band brake, block  brake, disc brakes, internal expanding brake clutch, single plate clutch, multi plate clutch, centrifugal clutch, cone clutch gas turbine, single stage gas turbine, two stage gas turbine, steam turbine, steam engine, wankel engine cam and follower, wankel engine cam, wankel engine follower, flat cam with translating follower, flat cam, radial cam with translating follower, radial cam, radial cam with oscillating follower, cylindrical end cam with translating follower,
cylindrical end cam, cylindrical cam with oscillating follower, end cams, end cams with oscillating follower, cylindrical cam with oscillating follower, quick return mechanisms, crank and slotted level quick return mechanism, crank level quick return mechanisms, whitworth quick return mechanism, draglink quick return mechanism, types of shaft coupling, types of drives, types of threads, straight line mechanism boards, hart straight line mechanism, peaucelliers mechanism, scott - russel mechanisms, watts approximate s.l. mechanisms, generation of cycloid and trochoid, generation of cycloids, generation of trochoids, trochoid generation, cycloid generation, generation of spirals, types of centrifugal impellers, types of screw fastenings, industrial equipments, water spray test rig, subsonic wind tunnel, diesel / petrol engine test system, hermetically sealed compressor test rig, dead weight pressure gauge tester, universal motor test bed, thermal conductivity of liquids, thermal conductivity of insulating slabs, thermal conductivity of insulating powder, thermal conductivity of gases, pin and disc wear test rig, pin wear test rigs, disc wear test rigs, hydraulic dynamometers, lubricating oil pump test rigs, industrial equipments, water spray test rig, subsonic wind tunnel, diesel / petrol engine test system, hermetically sealed compressor test rig, dead weight pressure gauge tester, universal motor test bed, thermal conductivity of liquids, thermal conductivity of insulating slabs, thermal conductivity of insulating powder, thermal conductivity of gases, pin wear test rigs, disc wear test rigs, pin and disc wear test rigs, hydraulic dynamometer, lubricating oil pump test rig and test rigs, lubricating oil pump test rigs, heat transfer laboratory equipments, conduction section equipments, composite walls apparatus, heat pipe demonstrator, hydraulic analogy of heat conduction, critical radius of insulating material, equipment for critical radius  of insulating material test, testing equipment for critical radius of insulating material, journal bearing apparatus with pressure gauge, ice plant trainer, asia, asian, india, indian, mumbai, maharashtra, industrial, industries, thane, pune, nashik, aurangabad, ratnagiri, nagpur, ahmednagar, akola, amravati, chandrapur, dhule, jalgaon, raigad, sangli, satara, belgaum, kolhapur, belgaon, yellow pages, directory, directories, products, chemical, mechanical engineering, electronics, electrical, packaging, plastic, machinery, metallurgical