Dressing Drums (Shallow Sterilizer)

Seamless made of S.S. Bearing ISI Mark IS:3831 Dressing Drums are made of Stainless Steel sheet by deep draw process & confirm to ISI specifications. These are ideal for sterilization of Gauges, Dressing Cotton, Gloves, surgical instruments used in operation theatres and emergency wards.

Sizes
 

• 225 ื 225 mm
• 275 ื 240 mm
• 275 ื 130 mm
• 350 ื 240 mm
• 350 ื 130 mm

 
Portable Autoclave

Suitable of general laboratory use as well as for field sterilization of instruments and dressings etc. Dome shaped S.S. lid is provided which seals the autoclave with neoprene jointless gasket. The lid is tightened to the body when closed. The working pressure is 1.1 to 1.2 Kg./cm2 (15-18PSI).
The sterilizer is made of S.S. Sheet deep drawn to cylindrical shape. The seamless construction allow no bacteria residue & free from dirt accumulation. It is equipped with dial pressure gauge 0-60 PSI, spring loaded safety valve, dead weight type safely valve and steam release valve.
The load is held in dressing drums (optional), which is supported on a stand (tripod) the autoclave is hydraulically tested at twice the working pressure as per ISI requirement. It is fitted with ISI marked heater. Supplied complete with plug & cord.
Suitable to work on 220/230 Volt, single phase, 50 Hz, AC supply.

Size
• 350 ื 300-325 mm

Optional Accessories
• Dressing Drum

 
 
Autoclave (Vertical)

High pressure, electrically heated vertical steam sterilizer is used for sterilization of surgical instruments, dressing material, linen, rubber, plastic material by means of saturated steam under pressure of 15 to 20 psi. (adjustable) Apart from health services it is also used in scientific research institutions and universities.Sturdy double walled construction with boiler/inner chamber made of stainless steel of 18 SWG sheet. Outer shell is made of mild steel finished with powder coated paint.
The boiler and outer shell is provided with air insulation. Lid is made of stainless steel plate and is tightened all-around by wing nuts. Moulded, jointless gaskets are made of Neoprene rubber. Sterilizer is hydraulically tested upto 40 psi.Autoclaves are fitted with water level arrangements to indicate water position inside the boiler, pressure gauge, Air/steam release cock, spring loaded safety valve which can be set at any selected point from 10 psi. to 20 psi ฑ 3 psi. and drain. ISI marked immersion type heating element heats the water and steam to desired temperature and pressure.Supplied complete with S.S. basket, cord and plug to work on 220 Volts, 50 cycles AC supply.

Available in following chamber sizes
  dia    ื    depth         load
  250    ื    450 mm      1.5 kw
  300    ื    500 mm      2.0 kw
  350    ื    550 mm      3.0 kw
  400    ื    600 mm      4.0 kw
  450    ื    600 mm      4.0 kw
  550    ื    750 mm      5.0 kw
 

 
H.P. Sterilizer

High pressure electrically heated vertical steam sterilizer used for sterilizing of surgical instruments, dressing material, linen, rubber, plastic material, injection liquids by means of steam under pressure of 15 to 20 psi. (adjustable).

Construction :–
Triple chamber with inner chamber and steam jacket made of thick stainless steel. Jacket is insulated by high grade glass wool to minimise the temperature loss. All sterilizers are hydraulically tested upto 2.5 times of working pressure. Outer chamber made of thick stainless steel sheet. Lid is made of thick stainless steel plate single piece and closed by wing nuts arrangement. Jointless neoprene gasket does not allow any leakage.
Fitted with double safety valve, water level indicator, water inlet and drain valves. Supplied complete with cord and plug but without dressing bins. Suitable to work on
220 volts, 1 ph 50 Hz, Ac supply.


Available in following chamber sizes :–
dia   ื   depth      load
300   ื   500 mm    2 kw
400   ื   600 mm    4 kw

Optional Accessories :–
• Automatic low water level cutoff device
• Pressure control switch
• Dressing Bins
(a) 275 ื 225 mm (11" ื 9") For size (a)
(b) 375 ื 275 mm (15" ื 11") For size (b)

 

 
H.P. Cylindrical Sterilizer – Vertical

The Unit comprises of steam jacket electrically heated, inner chamber & lid made of stainless steel, works on 3-phase, 440V., A/C, 50 HZ supply fitted with automatic pressure control switch, safety valve etc.

Chamber :–
The chamber is made of heavy gauge, stainless steel, fitted with stainless steel forged ring and forged lid, chamber is fitted with two safety valve of stainless steel, pressure gauge, water outlet valve and Air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve.

Steam Generator :–
The steam generator is made out of stainless steel heavy gauge fitted with pressure gauge and water draining valve.

Outer Cover :–
The outer cover is made out of stainless steel, duly insulated with high density mineral wool from the inner chamber and fitted with stable legs.

Principle :–
The steam generates from the jacket and gets condensed by the help of the eject valve which goes through condensing tube and the dry steam gets into the chamber to penetrate into the packs contained in the chamber.

Available in following capacities :–
dia ื depth load
300 ื 500 mm 4 kw
400 ื 600 mm 6 kw

Spare accessories
• Pressure gauge/compound gauge
• Water level gauge glass
• Wings nuts for vertical autoclave
• Neoprene Rubber jointless gaskets
Dia : 250mm, 300mm, 350mm, 400mm, 450mm, 550mm
• Heating elements : “L” type (Vertical Autoclave)
1.5 Kw, 2.0 Kw, 3.0 Kw, 4.0 Kw

 
H.P. Cylindrical, Horizontal Sterilizer

Introduction
The sterilizer is based on the principle that microbiological action of saturated steam at elevated temperature is rapid and through. All models work on the principle of downward displacement of air which is the most economical method of obtaining sterilization.
Robust and rigid construction, designed for all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical Institutions.
Suitable for Sterilizing hospital dressings, linen, rubber, plastic goods, surgical instruments, glasswares, utensils etc.

Construction
Triple walled with steam jacket and separate boiler Inner chamber and steam jacket are made up of Heavy gauge S.S. Sheet with leak proof argon-arc welding.
The sterilizer has single piece door made of stainless steel. Back plate and ring is also made of thick stainless steel sheet. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure.
Mounted on tubular steel frame with ground levelling screwed flanges. The Outer jacket is wrapped with asbestos sheet or glass wool to minimise the heat losses due to radiation and is covered by polished stainless steel sheet for that elegant appearance.

Steam Generator
Made of heavy stainless steel sheet. Heavy ring mounted in front of the boiler with folding thick stainless steel
plate is fitted with heating elements and low water level cutoff device to protect the former from burning out dry.
Front folding plate system provides for easy cleaning of the deposited scale on the elements and the walls for long life and efficiency. Fitted with water gauge glass for water level indication, water inlet and outlet valves.

Pressure Control
The “PIEZOSTAT” (Pressure control device) is incorporated in all electrically operated sterilizers. It economises on power consumption and reduces the frequent opening of the steam release valve and thus prevents the release of steam in the room, It cuts off the power supply to heaters when the set pressure is achieved and re-energises the heating elements when pressure falls below the set point.

Heating Elements
Flanged type, immersion heating elements are made of high grade material and duly ISI marked.

Safety Door
Sterilizer has hinged self-locking single piece thick S.S. plate door and cannot be opened when under pressure. The self-locking device automatically disengages the thread mechanism when the sterilizer is under pressure to preclude any eventuality of accident.

Single Point Control
Complete sterilizing cycle is controlled from one point with the help of “Multiport Valve” fitted at front top. Two speeds of steam exhaust are available; fast and slow.
Easily readable jacket and chamber pressure on gauges mounted on the multi port valve. A moisture trap is fitted in the chamber discharge line to absorb the condensate automatically to prevent moistening of the subject matter to be sterilized.

Switch Box
Houses the PIEZOSTAT, main switch, pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.

Other Features
• TRIPLE SAFETY :– The Sterilizer is provided with the triple safety features. At the boiler level by a PIEZOSTAT which automatically limits the pressure to the required set value and a spring loaded safety valve in case of its failure which releases the steam to keep pressure within the safety limits. At the chamber level, a spring loaded safety valve and a dead weight release valve to release the steam in case the pressure exceeds the safety limit. All these safety features function independent of one another and sequentially i.e. one takes over the charge in case of other’s failure.
• A plug screen prevents the discharge line from choking. The plug is easily removable for daily cleaning.
• Powerful Ejector for drying sterilized linen circulates air throughout the chamber. The circulating air passes through a corrosion resistant metallic wool filter.
• A dial thermometer is provided to show the chamber temperature.
• Automatic Vacuum breaker is provided to break vacuum in case of formation of vacuum due to steam condensation.

Operating Temp. & Pressure
Sterilizing Temp : 120ฐC
Sterilizing pressure : 1.2 to 1.5 kg/cm2 (15 psi to 22psi)
Power Requirement : Suitable to operate on 440V volts, 3 ph, 50 Hz, Ac supply

Available in following capacities
dia ื depth load
400 ื 600 mm 6 kw
400 ื 1100 mm 9 kw
500 ื 900 mm 9 kw
500 ื 1200 mm 9 kw

Optional Accessories
• Chamber/Jacket of S.S. 316
• Door of S.S. 304/316
• Dressing Drums
• Direct steam supply from centralised boiler
• Temperature recorder
• High pressure High vacuum model
• Additional door (Double door) model.
• Fully automatic micro processor controlled model

Spare Accessories
• Pressure gauge/Compound gauge
• Water level gauge glass
• Dial thermometer
• Non return valve
• Moisture trap
• Jointless Gasket :– Neoprene/silicon rubber,
size 400mm & 500mm
• Heating elements (Flange Type) Rating kw 6.0, 9.0

 

[ Email : info@ambalalab.com ]

 

Interlabs range of scientific educational surgical medical hospital engineering laboratory instruments apparatus and equipment, indian exporters, indian exporters directory, indian manufacturers directory, indian service providers, B2B Portal India, indian market, online guide, importers, buyers, electronic trade, indian business, exporters in india, manufacturers in india, business to business website india, e-commerce in india, electronic trade and commerce, tradeguide, business,import, export, e-commerce, product, business club, india business club, b2b portal, online trading, events, india business, ambala, haryana, ambala cantt, quality, laboratory equipments, educational equipments, equipments, manufacturers of equipments, manufacturers of laboratory equipments, manufacturers of educational equipments, exporters of laboratory equipments, exporters of educational equipments, manufacturers and exporters of laboratory equipments, manufacturers and exporters of educational equipments, manufacturers and exporters of engineering equipments, manufacturers of engineering equipments, exporters of engineering equipments, journal bearing apparatus, bearings, journal bearings, bearing apparatus, axial flow compressor test rig, test rigs, axial flow compressors, ice plant trainers, universal vibration apparatus, universal vibration , variable compression petrol engine test rig, steam jet refrigeration trainer, heat transfer laboratory, conduction section, test rigs, composite wall apparatus, lagged pipe apparatus, hydraulic analogy of heat conduction, heat transfer apparatus, pin fin apparatus, natural convection apparatus, forced convection apparatus, specific heat of air apparatus, heat transfer in agitated vessel, radiation apparatus, emmisivity measurement apparatus, stefan bolzmann apparatus, boiling apparatus,
condensation apparatus, boiling and condensation apparatus, critical heat flux apparatus, heat exchanger apparatus, concentric tube heat exchangers, feat exchangers, plain tube type heat exchangers, tube type heat exchangers, finned tube type heat exchangers, plain tube omparator type heat exchangers, finned tube comparator type heat exchangers, cross flow heat exchanger apparatus, flow heat exchanger, shell and tube heat exchanger, shell heat exchangers, tube heat exchangers, water to water type shell heat exchanger, water to water type tube heat exchanger, water to air type shell heat exchanger, water to air type tube heat exchangers, plate type heat exchanger apparatus, regenerative heat exchanger apparatus, thermal conductivity apparatus, thermal conductivity equipments, thermal conductivity of metal rod, metal rod, thermal conductivity of insulating powder, thermal conductivity, thermal conductivity of liquid, thermal conductivity by guarded hot plate, thermal conductivity of gases, refrigeration lab equipments,
equipments for refrigeration, equipments for airconditioning lab, airconditioning lab equipments, refrigeration and airconditioning labs, refrigerator cycle demonstrators, general cycle refrigeration trainers, refrigeration and air conditioning experimentation benches, industrial refrigeration trainers, air conditioning trainers, general cycle type equipments, simulation type refrigeration lab equipments, recirculating type lab equipments, window air conditioning trainers, industrial air conditioning trainers, centralised air conditioning trainers, ice plant trainers, vortex tube trainers, vortex tube demonstrators, water cooler trainers, domestic refrigeration trainers, vapor absorption refrigeration trainers, air expansion refrigeration trainers, cascade refrigeration trainers, desert cooler trainer, water cooling tower apparatus, refrigeration control display boards, steam jet refrigeration test rigs, heat pump trainers, air and water heat pump trainers, air heat pump trainers, mechanical heat pump trainers, gas charging units, cold storage trainers, convection apparatus, conduction apparatus, condensing pressure measurement equipments, evaporating pressure measurement equipments, input to compressor heater measurement equipments, general cycle refrigeration trainers, general cycle
refrigeration tutors, refrigeration trainers, refrigeration tutors, refrigeration and air-conditioning experimentation benches, refrigeration experimentation benches, air-conditioning experimentation benches, experimentation benches, industrial refrigeration trainer air
conditioning trainers, simulation type air conditioning trainer, air conditioning trainer simulation type, airconditioning trainer recirculation type, recirculation type airconditioning trainers, industrial air conditioning trainers, centralised air conditioning trainer, ice plant trainer, vortex tube trainers, vortex tube demonstrator, water cooler trainer, domestic refrigerator trainer, vapor absorption refrigeration trainer, air expansion refrigeration trainer, cascade refrigeration trainer, desert cooler apparatus, water cooling tower apparatus, steam jet refrigeration test rigs, steam jet refrigeration, test rigs, heat pump trainer, air and water heat pump trainers, hydraulics laboratory equipments, i.r. type hydraulic equipments, conventional type hydraulic equipments, h.l.t. type hydraulic equipments, reynoulds apparatus, verification of bernoullis theorem apparatus, flow over notches apparatus, flow over weir apparatus, flow through orifice and mouthpiece apparatus, flow measurement by venturimeter and orificemeter, losses in pipe fittings, losses in pipe friction, flow through submerged orifices, flow through helical coil, impact of jet apparatus, study of pressure measurement devices, study of free and forced vortex, flow isualisation apparatus, metacentric height of ship model, tilting flume apparatus, heleshaw apparatus, water hammer apparatus, study of flow measurement.devices, hydraulic machinery, hydraulic machinery equipments, centrifugal pump test rig, closed circuit type centrifugal pump test rig, constant speed type centrifugal pump test rig, ac motor and pulley type centrifugal pump test rig, dc motor variable speed type centrifugal pump test rig, multistage centrifugal, pump test rig, centrifugal pump test rigs, centrifugal pumps in series test rigs, centrifugal pumps in parallel test rig, closed circuit type centrifugal pump test rigs, reciprocating pump test rigs, closed circuit type reciprocating pump test rigs, ac motor type reciprocating pump test rigs, cone pulley type reciprocating pump test rigs, dc motor and dimmer control type reciprocating pump test rigs, dc motor and thyristorised control type reciprocating pump test rigs, dc motor and thyristorised control type reciprocating pump test rigs, gear pump test rig, closed circuit type gear pump test rigs, pelton wheel turbine test rig, closed circuit type pelton wheel turbine test rigs, pelton wheel turbine test rig recirculating pump, francis turbine test rig, closed circuit type francis turbine test rigs, theory of machines and tribology lab, theory of machines and tribology lab, universal vibration apparatus, cam analysis apparatus, whirling of shaft demonstrator, static and dynamic balancing apparatus, motorised gyroscope apparatus, journal bearing apparatus, governor apparatus, coriolli component of acceleration apparatus, michell titling pad bearing apparatus, pin and disc wear test apparatus, pin wear test apparatus disc wear test apparatus, modal analysis of beam influence
of inertia, epicyclic gear train, holding torque apparatus, ball bearing test rigs, lathe tool dynamometers, lathe tool dynamometers, drill tool dynamometers, milling tool dynamometer, grinding tool dynamometer, polygon law of forces apparatus, simple jib crane apparatus, simple wheel and axle apparatus, differential wheel and axle apparatus, single purchase crab apparatus, double purchase crab apparatus, screw jack apparatus, worm and worm wheel apparatus, worm wheel apparatus, rope and pulley block apparatus, rope block apparatus, pulley block apparatus, applied mechanics laboratory equipments, polygon law of forces apparatus, simple jib crane apparatus, simple wheel and axle apparatus, differential wheel and axle apparatus, single purchase crab apparatus, double purchase crab apparatus, screw jack apparatus, worm and worm wheel apparatus, rope and pulley block apparatus, electrical machine laboratory equipments, d. c. machine test  apparatus, transformer test apparatus, induction motor test apparatus, structural laboratory equipments, elastic and continuous beam apparatus, shear center apparatus, bending moment and shear force apparatus, deflection of curved beam apparatus, suspension bridge apparatus, two and three hinged arches apparatus, column buckling apparatus, deflection of pin joined truss apparatus, elastic beam apparatus, continuous beam apparatus, bending moment apparatus, shear  force apparatus, hinged arches apparatus, stress analysis laboratory equipments, diffused light research polariscope, reflection polariscope, oblique incidence attachment, stress freezing oven,  fringe sharpener, model cutter, model polisher, dust collector, aerodynamics turbomachinery laboratory equipments, thyristor control, cascade test tunnel, lathe tool dynamometer, drill tool dynamometer, milling tool dynamometer, demonstration board models, kinematic pairs, inversion of four bar chain, inversion of slider crank chain, inversion of double slider crank chain, generation of involute gear teeth, kinematics of involute gear teeth, interference and undercutting single shoe brake, double shoe brakes, band and block brake, band brake, block  brake, disc brakes, internal expanding brake clutch, single plate clutch, multi plate clutch, centrifugal clutch, cone clutch gas turbine, single stage gas turbine, two stage gas turbine, steam turbine, steam engine, wankel engine cam and follower, wankel engine cam, wankel engine follower, flat cam with translating follower, flat cam, radial cam with translating follower, radial cam, radial cam with oscillating follower, cylindrical end cam with translating follower,
cylindrical end cam, cylindrical cam with oscillating follower, end cams, end cams with oscillating follower, cylindrical cam with oscillating follower, quick return mechanisms, crank and slotted level quick return mechanism, crank level quick return mechanisms, whitworth quick return mechanism, draglink quick return mechanism, types of shaft coupling, types of drives, types of threads, straight line mechanism boards, hart straight line mechanism, peaucelliers mechanism, scott - russel mechanisms, watts approximate s.l. mechanisms, generation of cycloid and trochoid, generation of cycloids, generation of trochoids, trochoid generation, cycloid generation, generation of spirals, types of centrifugal impellers, types of screw fastenings, industrial equipments, water spray test rig, subsonic wind tunnel, diesel / petrol engine test system, hermetically sealed compressor test rig, dead weight pressure gauge tester, universal motor test bed, thermal conductivity of liquids, thermal conductivity of insulating slabs, thermal conductivity of insulating powder, thermal conductivity of gases, pin and disc wear test rig, pin wear test rigs, disc wear test rigs, hydraulic dynamometers, lubricating oil pump test rigs, industrial equipments, water spray test rig, subsonic wind tunnel, diesel / petrol engine test system, hermetically sealed compressor test rig, dead weight pressure gauge tester, universal motor test bed, thermal conductivity of liquids, thermal conductivity of insulating slabs, thermal conductivity of insulating powder, thermal conductivity of gases, pin wear test rigs, disc wear test rigs, pin and disc wear test rigs, hydraulic dynamometer, lubricating oil pump test rig and test rigs, lubricating oil pump test rigs, heat transfer laboratory equipments, conduction section equipments, composite walls apparatus, heat pipe demonstrator, hydraulic analogy of heat conduction, critical radius of insulating material, equipment for critical radius  of insulating material test, testing equipment for critical radius of insulating material, journal bearing apparatus with pressure gauge, ice plant trainer, asia, asian, india, indian, mumbai, maharashtra, industrial, industries, thane, pune, nashik, aurangabad, ratnagiri, nagpur, ahmednagar, akola, amravati, chandrapur, dhule, jalgaon, raigad, sangli, satara, belgaum, kolhapur, belgaon, yellow pages, directory, directories, products, chemical, mechanical engineering, electronics, electrical, packaging, plastic, machinery, metallurgical