This machine is used for mounting the specimen with bakelite powder and also to handle properly without the conduction of heat to the operator while grinding/lapping the specimen. It also helps for proper alignment while using with microscopes. This machine will also help to reduce the recurring cost of consumable drastically unlike using cold setting compound. This machine comes with powder coating finish for corrosive free life and with heavy tonnage hydraulic jack and digital timer.

Specifications
Mold Dia 32mm. Other Dia’s on specific enquiry.
Model BSPIL-MET-01003 of 3 tonn capacity
Model BSPIL-MET-01003A of 5 tonn capacity
Model BSPIL-MET-01003B of 5 tonn capacity with pressure guage With Digital Timer

Mandatory Accessories and Consumables : Bakelite Powder

Optional Accessories : Hydraulic Oil, Spare Heating Element, Timer, Hydraulic Jack.

This system is used for rough polishing from 80 grit to 120 grit with the help of endless belt. This gives a parallel surface to the specimen mounted in the mould. Metallography specimen can be conveniently finished by preliminary grinding without heat generation.

Specifications

An elegant looking stainless steel hand polishing stand for metallographic practice. It consists of 4 surface plates with clamps to fix 3"x11" of different water emery papers to economize the consumption of consumables and swiftly do the various grit polishing more efficiently, which comes with water dripping arrangement to prevent original metallurgical properties.

Mandatory Accessories and Consumables : Emery Papers and Grit Emery Paper.

Optional Accessories : Hylam Clamping Scale and Wing Nuts.