| Moment of Force |
Contains the necessary equipment to demonstrate several
basic principles like torque, lever and center of gravity.
Consists of a wooden support stand, a 50 cm meter stick, 50g
and 100g knife edges masses. |
|
 |
| |
| Ticker Tape Timer AC |
| For the measurement of speed and acceleration. It
operates on 12V AC and is safe for students. Paper tape,
drawn through guides, is struck by a dotting screw carried
on the armature. On wooden base with 4 mm sockets. Includes
one roll of tape and 12 carbon discs. |
| |
| Transformer: |
Suitable for RM5031 Ticker Tape
Timer AC. Input 220V AC., Output 12V AC. |
| |
| Ticker Tape Timer DC |
This is operated by two dry cell batteries (not
included). It produces 30 to 50 dots per second. The wooden
base provides
stability. Includes one roll of tape and 12 carbon discs. |
| |
| Ticker Tape: |
Roll of paper tape width approx.
10mm. |
| |
| Carbon Discs: |
| Pack of 48. |
|
  |
| |
| Force Table |
|
This force table is designed for force
and vector demonstrations. Table is constructed of machined
aluminum (40 cm dia) and graduated in degrees around its
full circumference. Unit is mounted on a heavy stable tripod
base with levelling screws. Consists of 4 pulleys, 4 weight
hangers and 4 sets of slotted weights. |
|
 |
|
|
|
Falling Body Apparatus |
|
A simple apparatus to demonstrate
that a body propelled horizontally will fall vertically
at the same rate as a similar body allowed to fall
freely. Comprises of a spring loaded L-section launcher.
There are holes in it for placing two 19mm dia ball.
When the launcher is released by a push button, one ball
falls freely whereas the second ball is projected
forward. Mounted on a wooden box with a storage pocket
for balls. Includes two steel balls. |
|
|
 |
|
|
| Loop the Loop |
|
A simple apparatus to demonstrate both
centripetal acceleration and conversion of potential energy
into kinetic energy. A steel ball released at the upper end
of the loop, it gains enough energy to transverse the loop
without falling. Comes completely assembled on a wooden
base. |
|
 |
| |
| Pulley
Demonstration Set |
|
This pulley set is an ideal set up to
demonstrate law of conservation of energy, concepts of
force and mechanical equilibrium. Contains a 15x25cm
wooden base with mounted capstan and a screw eye. The
set has a 62.5cm vertical support rod and a 21cm
crossbar with clamp, eight single pulleys, 2 double
pulleys, a wheel and axle, six pulley clamps, 90° clamp,
nine slotted masses ranging from 10g to 1000g, seven
weight hangers, and a pulley cord. |
|
|
 |
| |
