|
     |
 |
|
| |
| Double Beam Balance |
|
Two pan balance for accurate and rapid
weighing up to 2000g
when used with supplementary masses. The balance has center
indicating sliding masses to weigh up to 210g, spring loaded
zero adjust compensator and magnetic damping. Stainless
steel pans are of 150mm diameter. |
| |
| Beams: |
0 to 200g x 10g
0 to 10g x 0.1g |
| -01 |
Set of Supplementary Masses
1 kg, 500g, 200g and 100g |
| -02 |
Support Rod for
under weighing facility. |
| -03 |
Un-calibrated Tare Beam
of capacity 200g. |
|
|
 |
| |
| Triple Balance |
|
A single pan, low form balance that has
three notched beams with center indicating sliding masses
giving total weighing capacity of 610g. The capacity can be
extended to 2610g with supplementary masses. Spring loaded
zero adjust compensator and magnetic damping are provided.
Stainless steel pan is of 150mm diameter. |
| |
| Beams: |
0-500g x 100g
0-100g x 10g
0-10g x 0.1g |
| -01 |
Set of Supplementary Masses to
extend the range of the
balance to 2610g capacity. |
| -02 |
Support Rod for under weighing
facility. |
| -03 |
Un-calibrated Tare Beam of capacity
200g. |
|
|
 |
| |
| Four Beam Balance |
|
A high-form balance with four beams, each
provided with a non-removable
sliding mass, has total weighing capacity of 311g. No
additional mass is required. Provided with spring loaded
zero adjust compensator and magnetic damping, it has a pan
of 90mm diameter with two pouring spouts and handle. Height
of stirrup approx. 180mm. A platform housed in the base can
be used for density determination. |
| |
| Beams: |
0-200 x 100g
0-100 x 10g
0-10 x 1g
0-1 x 0.1g
RM5012 |
|
|
 |
|
|
| Spring Balance |
|
Tubular balance made from plastic. Each
range is colour coded for easy identification. The balance
can be used for both force and mass measurements. Spring
action is clearly visible and zero adjustment is provided.
Total length 250mm. |
| |
| |
Capacity |
Division |
| -01 |
250g/2.5N |
5g/0.25N |
| -02 |
500g/5N |
10g/0.50N |
| -03 |
1000g/10N |
20g/1.0N |
| -04 |
2000g/20N |
40g/2.0N |
| -05 |
3000g/30N |
60g/3.0N |
| -06 |
5000g/50N |
100g/5.0N |
|
|
 |
|
|
| Slotted
Masses With Rack |
|
These precision made mass sets are
made from brass. The masses are finely adjusted, marked
and mounted on a simple rack with handle. |
| |
| -01 Set of twelve masses: |
1x500g, 2x200g, 1x100g, 1x50g, 2x20g
1x10g,1x5g, 2x2g, 1x1g |
| -02 Set of ten masses: |
1x500g, 5x100g, 1x50g, 2x20g, 1x10g |
| -03 Set of eight masses: |
1x500g, 2x200g, 1x100g, 1x50g, 2x20g, 1x10g |
|
|
|
 |
| |
| Slotted Brass Masses on
Carrier |
Each set consists of nine equal masses on a carrier of
the
same mass. |
| |
| -01 |
Set of 10g masses, total 100g |
| -02 |
Set of 20g masses, total 200g |
| -03 |
Set of 50g masses, total 500g |
| -04 |
Set of 100g masses, total 1000g |
|
|
 |
| |
|
| |
|
|
|
      |
|
