This 3-1/2 Digits 1999 Counts Backlit LCD Display Digital Clamp Tester is compact in size for measurements in tight locations where clamping around conductors is a problem. It is a very handy instrument and is ideal for all professionals wanting to measure AC Current in places where conductors are very crowded.

This instrument is ideal to measure AC Voltage, DC Voltage, AC Current and Resistance. It has diode testing and audible continuity testing facilities. It has auto power off facility. It also has Data Hold and Maximum Hold Facilities.

It comes complete with test leads, battery and instruction manual.

Model : IBL-125

Yet another AC/DC Digital Clamp Tester of high accuracy. This is a 3-1/2 Digits 1999 Counts Digital Clamp Tester that has Data Hold Facility to freeze the reading of the Display. Highly recommended for field engineers.

It is used to measure AC and DC Current upto 1000A and AC and DC Voltage upto 600V. Using this instrument Diode test can also be done. It comes complete with testing leads and Instruction manual. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges.


Model : IBL-3250

This is a 3-3/4 Digits 3999 Counts LCD Display AC / DC Clamp Tester. Highly recommended for field engineers.

This Digital Clamp Tester has Data Hold facility that freezes the current reading of the LCD Display. It is an ideal tool for electrical measurements made in accordance with IEC - 1010 - 1 safety standard.

Using the Clamp input it can be used to measure AC and DC Current from 0.1A to 1000A. Voltage DC 1000V & 750V AC, Frequency upto 20MHz, Resistance, Capacitance upto 100 Micro F, diode testing and audible continuity testing facility.

It comes complete with testing leads, instruction manual and carrying case. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges.
 

Model : IBL-4250

This Digital True RMS AC / DC Clamp Tester having 3-3/4 Digital 4369 counts LCD Display is ideal for measurement of ampere and voltage for distorted waveforms where the parameters being measured should be actually perfectly equal to the waveform even if the waveform is completely distorted. Used mostly for measuring current of electrical motors, generators and in power plants where taking care of the distortions is of prime importance.

It is used to measure True RMS AC Voltage, True RMS AC Current, DC Voltage, DC Current, Resistance and Frequency for both voltage and current inputs. It has audible continuity testing facility and has peak hold, maximum and minimum record facility. The instrument also has Hold facility to freeze the reading of the LCD Display. It has a maximum clamp jaw size of 40mm.

It comes complete with Testing Leads, Instruction manual and battery.
Model : IBL-5250