• Speed torque curves of Shunt motor, DC series motor, DC compound motor & Separately excited DC motor.
• DC separately excited generator.
• DC compound generator.
• Armature resistance starter & SCR based soft start mechanism.
• Speed torque curve of wound rotor induction motor with rotor shorted & with different rotor resistance.
• Speed torque curves of rotor short induction motor.
• DOL/Star- Delta starters, rotor resistance starter.
• Synchronous motor/ generator, V-I curve of Synchronous generator
• Speed torque curves of split phase induction motor.
• Capacitor start with rotor shorted.
• Capacitor start, capacitor run type with rotor shorted.
• V-I curves of synchronous single phase generator with excitation at rotor rings.
• Speed torque curves of Universal motor.
• Speed torque curves of Shaded pole motor

Machine Type

• Integrated DC m/c
• Integrated 3 phase AC m/c
• Integrated 1 phase AC m/c
• Universal Motor
• Shaded pole Motor
• Stepper Motor

• Transistorised superhet AM & FM radio either in assembled OR CKD form.
• Useful for hobbyist, ITI, Polytechnic Engg. students.
• Battery low indication LED
• Onboard earphone jack & speaker.
• Detailed ident of components enables user to understand complete assembly as well as working.
• Single PCB construction.
• Illustrative user's guide with assembly instruction.

>>AM & FM Radio in CKD form
a) Unassembled PCB
b) Components

OR AM & FM Radio - Fully assembled tested radio kit.
 

• Clearly identified functional blocks viz. Mixer, Oscillator,
  Amplifier, Detector & Audio
  Amplifier with volume control.
• Test points at each stage of both AM & FM sections - Total
  17 nos
• AM radio specifications
  Tuning range 520kHz to 1620kHz.
  IF Frequency 455kHz.
• FM radio specifications
  Tuning range 88MHz to 108MHz.
  IF Frequency 10.7MHz.
• Power supply : 9V either using onboard battery or external
  DC power supply with ON/OFF switch.
• Mechanical Dimensions : 282mm X 127mm, packed in a
  compact corrugated box with detacheable baffel.

• PCPID Trainer Based PID controller software.
  Operating modes
  a)Simulator Mode
  b)Process Monitoring Mode
  c) PC based PID controller Mode

   >> Master unit
        Built in power supply
        On board DPM
        Computer interface
        Analog PID controller (Optional)

   >> Expt. Panels Offered
        a) Temperature Sensing Transducers (MIT6)
        b) Process Control Simulator (optional)

   >> Operating voltage : 230V +/- 10%,50Hz.
   >> Real time systems (optional)

• Built in power supplies
• On board DPM
• Manual valves
• Rotameters 200LPH
• Flow meters/Transmitters
• Level Sensor/Transmitters
• Level Tank 20 Lt.
• Liquid storage Tank 70 Lt.
• Fractional horse power centrifugal pump - 500LPH
• Ratio Control
• Cascade Control
• Feedforward Control Panel (Optional).
• Computer interface card
• PC Based PID controller software with provision for Ratio & Cascade control.
  Operating modes :
  Simulator Mode
  Process Monitoring Mode
  PC based PID controller Mode
• External Accessories (Optional)
• Real time systems (optional)